No products in the cart.
JMC DRY CHAIN LUBE 300ml JMC
Priceunit: 1 Unit
JMC Chain spray drying Fully synthetic, bright, highly adhesive special lubricant with additives against aging, corrosion and abrasion. The high PTFE solids guaranteed a fat-free sealing of the entire surface. Power: - For O- and X-Ring chains recommended - Excellent adhesion, no dripping and centrifuging - Economical - Waxy dry film, therefore no adhesion of dirt - Water-resistant, extreme protection against corrosion - Excellent damping properties - Excellent creep and penetration - Very resistant to aging, also against aggressive media - Low friction, low wear - Extreme UV Resistant Application: - For the lubrication of all chains, sliding surfaces, spline shafts, cardan and universal joints, spindles, guides and gears - Chiefly used in dusty environments Application: Shake well before use. Surfaces should be dry, dust and grease. The dry chain lube thinly. Sprinkle again thin after about 2 minutes. Allow to dry very well before loading. Content: 300 ml aerosol Package: 12
Manufacturer Nr.: JMC MR 10011
EAN: 4043981095586
EU Responsible Person : BTS GmbH, Plochingerstrasse 41, Otsfildern, 73760, info@biketeile-service.de
This product is a universal article. It means, that it can be used for a multitude of vehicles.
Unfortunately, it also means, that we cannot give information about your specific vehicle (Scooter, Motorcycle, or Quad).
It also means that specificities like the build for batteries, socket for lamps or engine type for oil has to be verified by the customer.
It is also possible that small scale conversion work might be needed for body or adjacent parts in the case of cosmetic- and styling parts.
We recommend that the customers check the product picture before ordering.
Please contact our customer service for questions or additional information
Unfortunately, it also means, that we cannot give information about your specific vehicle (Scooter, Motorcycle, or Quad).
It also means that specificities like the build for batteries, socket for lamps or engine type for oil has to be verified by the customer.
It is also possible that small scale conversion work might be needed for body or adjacent parts in the case of cosmetic- and styling parts.
We recommend that the customers check the product picture before ordering.
Please contact our customer service for questions or additional information
Signal word: Danger
Hazard statements
- H222 Extremely flammable aerosol.
- H229 Pressurized container: May burst if heated.
- H315 Causes skin irritation.
- H336 May cause drowsiness or dizziness.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P102 Keep out of reach of children.
- P101 If medical advice is needed, have product container or label at hand.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 Do not spray on an open flame or other ignition source.
- P251 Do not pierce or burn, even after handling.
- P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
- P271 Use only outdoors or in a well-ventilated area.
- P273 Avoid release to the environment.
- P280 Wear protective gloves.
- P302+P352 IF ON SKIN: Wash with plenty of water.
- P332+P313 If skin irritation occurs: Get medical advice/attention.
- P304+P312 IF INHALED: Call a POISON CENTER or doctor/physician if you feel unwell.
- P410+P412 Protect from sun exposure. Do not expose to temperatures exceeding 50 °C/122 °F.
- P501 Dispose of contents/container to an appropriate recycling or disposal facility.
EUH208 Contains Benzene, C9-13-alkyl derivs., Distillate
Media:
Sicherheitsdatenblatt Sicherheitsdatenblatt Sicherheitsdatenblatt Sicherheitsdatenblatt Sicherheitsdatenblatt Sicherheitsdatenblatt Sicherheitsdatenblatt Sicherheitsdatenblatt Sicherheitsdatenblatt SicherheitsdatenblattPlease note, that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.:
