No products in the cart.
sealant Dirko HT silicone black +315°C 70ml 43147
Dirko HT black sealant is a high-quality, high-temperature resistant, one-component and permanently elastic silicone-based sealing compound. The Dirko HT silicone engine sealant has a very good adhesion on all common metals, on cast iron, glass and plastics (except PE, PP or PTFE).
It is particularly suitable for the safe sealing of planar worked surfaces and can be supportive on paper seals.
Temperature range: -60°C up to +285°C (24h up to +315°C)
Sealing gap max.: up to 2mm
The sealant is resistant to mineral oils (also with additives), synthetic oils, lubricating greases, coolants, UV radiation, cold and hot water, salt water, cleaning agents, weak acids and alkalis.
Applicable for valve covers, oil pans, water or oil pumps, clutch covers, engine covers, gearbox housings, crankcases, thermostat housings, flange connections, head lamps, tail lights and much more on your motorcycle, scooter, quad or car.
Very easy to apply and process. Apply to one side of the sealing surface and spread with your finger. Seals after a short time. Can be easily rubbed off again later, if the sealing must be removed for repair. 70ml tube for professional use.
Dangerous goods labelling:
Classification according to EC Directive 1272/2008 as amended.
Hazard identification:
ATTENTION
Danger warnings:
H229: Pressurized container: may burst if heated.
H372: Causes damage to organs through prolonged or repeated exposure.
Safety phrases:
P210: Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Do not smoke.
P251: Do not pierce or burn, even after use.
P410+P412: Protect from sunlight and do not expose to temperatures exceeding 50°C.
It is particularly suitable for the safe sealing of planar worked surfaces and can be supportive on paper seals.
The sealant is resistant to mineral oils (also with additives), synthetic oils, lubricating greases, coolants, UV radiation, cold and hot water, salt water, cleaning agents, weak acids and alkalis.
Applicable for valve covers, oil pans, water or oil pumps, clutch covers, engine covers, gearbox housings, crankcases, thermostat housings, flange connections, head lamps, tail lights and much more on your motorcycle, scooter, quad or car.
Very easy to apply and process. Apply to one side of the sealing surface and spread with your finger. Seals after a short time. Can be easily rubbed off again later, if the sealing must be removed for repair. 70ml tube for professional use.
Dangerous goods labelling:
Classification according to EC Directive 1272/2008 as amended.
Hazard identification:
ATTENTION
Danger warnings:
H229: Pressurized container: may burst if heated.
H372: Causes damage to organs through prolonged or repeated exposure.
Safety phrases:
P210: Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Do not smoke.
P251: Do not pierce or burn, even after use.
P410+P412: Protect from sunlight and do not expose to temperatures exceeding 50°C.
Manufacturer Nr.: Diverse / Import
EAN: 4057237638267
EU Responsible Person : BTS GmbH, Plochingerstrasse 41, Otsfildern, 73760, info@biketeile-service.de
Hazard Statements:
- H319: Causes serious eye irritation.
Precautionary Statements:
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P305, P351, P338: If in eyes, rinse cautiously with water for several minutes.
- P337, P313: If eye irritation persists, get medical advice.
Please note, that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.:
