No products in the cart.
Motorcycle Battery YTZ14S-FP JMT
Priceunit: 1 Unit
Lithium-ion batteries from JMT
Fresh, modern design and high-tech for your motorcycle.
Spacer (S)
The battery is equipped with one or more spacers that are glued under the battery with the adhesive strip provided so that the battery fits exactly into the battery box.
Waterproof (W)
The battery is completely waterproof and will not be damaged if the motorcycle is cleaned with high pressure.
Indicator (I)
All batteries are equipped with a battery status indicator.
Simply press the test button. The red digital display shows the current voltage.
The battery must be charged when the voltage is below 12.9 V at the latest.
By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved without any significant effort.
The following advantages speak for JMT lithium-ion batteries:
- approx. 1/3 of the weight of the comparable lead-acid battery
- unbeatable ratio of cost/weight savings
- can be installed in any position as it does not contain any acid
- contains no heavy metals
- balanced discharge/charge of all cells through balancer
- fast charging with high charging current possible
- very low self-discharge (max. 5% per month)
- still good performance even at high temperatures up to 60°C
- safe technology and long service life
Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity.
For this reason, the lithium versions of the JMT batteries only need 1/3 of the capacity of a comparable lead-acid battery for the same starting power.
An even charge level of all cells is also ensured by a built-in processor (“balancer”). The dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries with the help of adapters.
The connections are also identical, which is why the battery can be replaced in just a few minutes without any further adjustments.
Please note that only suitable chargers may be used for charging. We recommend JMP chargers.
The maximum recommended charging currents can be found in the technical data below.
The use of a charger with a voltage of more than 14.9 V to charge a deeply discharged battery with less than 9.6 V is not permitted.
The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.
Technology
JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium polymer process in their production.
This means that they cannot burst into flames or explode during normal operation.
The technology and the manufacturing process ensure the highest safety standards for lithium batteries.
- 12 V maintenance-free lithium-ion battery
- recommended charging current 2A
- maximum charging current for fast charging 20A
Comparable in dimensions and connections with:
YTZ12S
YTZ14S
YTX12-BS
YTX12A-BS
YTX14-BS
YTX14H-BS
KMX14-BS
Technical data
| Technical Data | |
|---|---|
| Voltage: 12v Capacity: 4 Ah (10 hrs) Energy output: 48 Wh Version: Lithium Activated: Yes Cold test current according to manufacturer: 280 A Manufacturer's test standard: SAE Length: 150 mm Width: 87 mm Height: 105 mm Weight ready for use: 1.4 kg Connection type: from above from the front Positive pole: front left Negative pole: front right Manufacturer: JMT | |
EU Responsible Person : BTS GmbH, Plochingerstrasse 41, Otsfildern, 73760, info@biketeile-service.de
Please note, that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.:
