Center stand -BGM PRO Soft Stop V2 System- Vespa Largeframe (10") Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), GT/GTR1 0789

BGM PRO kickstand V2 => now with adjustable stop

ADVANTAGE OF THE RUBBER STOP
The BGM PRO kickstand with soft stop system puts an end to kickstand feet that hit hard against the floor plate. As with the Vespa PX models, the kickstand stop is now positioned on the sturdy mounting plates on the central frame tunnel.
The kickstand is ideally stopped here via a rubber buffer without causing the floor plate to vibrate.
This not only makes the noise when folding up much more pleasant, the kickstand with Soft Stop technology also protects the frame. Cracks in the floor pan caused by the original kickstand are now history forever.

NEW version V2
The rubber stop is now individually adjustable by means of a thread. This allows the kickstand to be perfectly adjusted to your own vehicle and the desired distance to the frame. For example, the main stand can have an extra wide distance to the floor plate so that it can be operated very comfortably at all times. Conversely, the main stand can be adjusted close to the floor plate to ensure maximum ground clearance at all times.

PROTECTING THE FRAME
The Soft Stop main stand is supplied with stand plates. These have additional contact plates against which the main stand rests. This prevents direct contact between the kickstand tube and frame and also protects the frame (the original Piaggio kickstand rubs directly against the painted floor plate!).

SCOPE OF DELIVERY
Longer bolts are required for installation; these are included in the set. The main stand spring and stand feet can of course still be used from the original stand, but alternatively these can also be found in the accessories (below).

FINAL: Very useful technical update, visually almost invisible!