Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200

Very high quality special nut, made in germany, for all Vespa engines with the clutch on the crankshaft before year of manufacture 1990 which have a so-called castle nut in the original.

Thus suitable for all vehicles from year of manufacture 1950, such as V1-V5, VNB, VNA, GS150, GS160, Sprint, Rally, GT, GTR, T5, Cosa1, PX, PE etc...

This nut, made in Germany for us, completely replaces the old-fashioned castle nut and thus allows safe and precise work even with a torque wrench. In addition to the precise manufacturing, it is also suitable for a tightening torque of over 70Nm due to the use of a steel of hardness 10 (in our internal tests we were able to load the nut with 170Nm tightening torque). Conventional castle nuts often give up at 40Nm. With the BGM nut is a slipping and a defect of the crankshaft / clutch hub by a loosened clutch nut ad acta put.

• Replaces the original clutch crown nut
• Fits all Largeframe with old 6/7 spring clutch type
• Hardness: 10
• Possible tightening torque: more than 70Nm (not more than 100Nm and do not tighten with impact wrench)
• Thread: M12x1,50 (with collar)
• Diameter at the collar: 18,6mm
• Height: 9mm
• Width across flats: 15
  

Incl. matching serrated lock washer

Conclusion: No more slipping when loosening / tightening the nut and a bombproof fastened clutch.

TIP: Also suitable as pole nut for Flytech/Vespatronic pole nut for Vespa GS160 / GS4 (VSB1T), SS180 (VSC1T), Rally180 (VSD1T), Rally200 (VSE1T, Femsatronic)

_{AI-translation}