No products in the cart.
Resistor 7,5 Ohm / 50W
Power resistor 7.5 Ohm / 50 Watt
When the original flashers are converted to LED or halogen flashers, the flashing frequency changes automatically. The parallel-connected power resistors provide a remedy. The correct selection of suitable resistors is listed in the table below. If you are not sure which resistance you need, please do not hesitate to contact us via the contact form (technical department) on our homepage
For micro 1000 / Rhombus DF / DF Dark and a light indicator light 1 resistor á 33 Ohm for the rear light and 1 resistor á 7.5 Ohm for the brake light is required.
Required resistance for conversion to Kellermann turn signals (per turn signal)
21 Watt Power consumption of the original indicators
micro 1000 Halogen - 10 Ohm Art. 123.950
micro 1000 / micro Rhombus (yellow, white, dark, DF, PL, extremes) - 7,5 Ohm Art. 123.952
BL 1000 Halogen (yellow, white, SG) - no power resistor
BL 1000 LED (LED, Dark, PL) - 7.5 Ohm Art. 123.952
Required resistance for conversion to Kellermann indicators (per page)
10 Watt Power consumption of the original indicators
micro 1000 Halogen - 10 Ohm Art. 123.950
micro 1000 / micro Rhombus (yellow, white, dark, DF, PL, extreme) - 10 Ohm Art. 123.950
BL 1000 Halogen (yellow, white, SG) - no power resistor
BL 1000 LED (LED, Dark, PL) - 10 Ohm Art. 123.950
EU Responsible Person : BTS GmbH, Plochingerstrasse 41, Otsfildern, 73760, info@biketeile-service.de
Attention! Does not fit for Aprilia SR Ditech Sport 50 RLD10 2004, 4,5 PS, 3,3 kw
Please note, that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.:
